Oase Watercourse Spring / Spillway Box | |||
| |||
The Oase Watercourse Spring / Spillway Boxes are a simple solution to the problem of installing a waterfall without a header pool. These one piece waterfall boxes are simply placed on the liner at the top of the stream with the rear flange sealing to the liner at the back of the box. These ultra strong boxes are designed to be covered in rocks and cobbles and have a raised lip on the top of the water chute to prevent stones, cobbles or even soil falling into the water. In addition to adding strength, the internal support cones also diffuse the waterflow to ensure an even coverage across the outflow lip. Unlike other spillways these one piece watercourse springs are completely sealed, so no matter how much water is pumped in, the only place it can come out is through the opening at the front, ensuring water is never lost. Oase Watercourse Spring / Spillway Box Dimensions Oase Watercourse Spring 15000 - 521mm long x 474mm wide x 260mm high (480mm Waterfall width) Oase Watercourse Spring 22500 - 699mm long x 474mm wide x 260mm high (660mm Waterfall width) Oase Watercourse Spring 35000 - 1003mm long x 486mm wide x 260mm high (960mm Waterfall width) Oase Watercourse Spring / Spillway Box Features One piece boxes to ensure leak free installation Flowrate between - 15000 and 36000 litres per hour Extra strong to allow them to be camouflaged with rocks and cobbles 2" (50mm) BSP female connection on 15000 and 22500 3" (75mm) BSP female connection on 35000 2" (50mm) BSP male to male adaptor supplied with 15000 and 22500 3" (75mm) BSP to 2" (50mm) BSP male to male adaptors supplied with 35000 |